IK Multimedia TONEX Capture Tone Modeling And Reamping Box (1141137)

IK Multimedia TONEX Capture Tone Modeling And Reamping Box (1141137)

The IK Multimedia TONEX Capture reamping accessory connects your audio interface to amps, cabinets, and pedals with the correct signal levels for tone capture and reamping. It helps you record direct amp tones without microphones or sound isolation, so you can work from more places and stay flexible.

Three-in-One Workflow for Capturing and Reamping

TONEX Capture combines tone modeling, amp recording, and reamping in one accessory, which streamlines the signal path between your interface and your gear. Two separate gain stages let you adjust levels going to the amp and coming back to your interface, therefore keeping your routing controlled for capture sessions or reamping.

• Three accessories in one: tone modeling, amp recording, and reamping
• Two separate gain stages for level control to and from your amplifier
• Left attenuation control for the signal going to your amplifier (up to 24 dB)
• Right attenuation control for the signal returning to your interface (up to 24 dB)
• ON LED power indicator

Direct Amp Tone Capture with or Without Microphones

TONEX Capture lets you capture your real amp tone with or without mics. Capturing the signal directly means you can record without microphones or sound isolation, and then use TONEX to complete your tone with cabinet options when needed.

• Captures your amp tone pre-cabinet without microphones or load boxes
• From Amp circuit takes a copy of your amp’s direct output and sends it safely to your audio interface input
• TONEX and AmpliTube VIR technology support access to hundreds of virtual cabinets and ultra-authentic IRs

Connect Amps, Cabinets, and Pedals with Proper Level Matching

When you route line-level audio from an interface into an amp, correct level matching matters. TONEX Capture connects to your interface output and feeds your amp using the left attenuation control, then takes a signal from your amp line out (with a speaker connected) or from a pedal output and returns it to your interface using the right attenuation control.

• Connects a line signal from an audio interface to your amplifier
• Accepts amplifier signals from power output or preamp output
• Connects to an amplifier line output (speaker connected) or pedal output
• Amp Out connection supports routing to a balanced device and uses isolation to help avoid ground loops
• Cabinet connection for sending Amp Out to a cabinet

Ground-Loop Control and Galvanic Isolation for Cleaner Signal Paths

Ground loops can add hum and noise, especially when you connect multiple pieces of gear. TONEX Capture includes galvanic isolation and GND LIFT switching to help minimize ground-loop issues in common capture and reamping setups.

• Galvanic isolation to help eliminate hum and noise
• GND LIFT switch interrupts ground connection to minimize ground loops
• Isolated connections for routing to a guitar amp input and for Amp Out to a balanced device

TONEX Software Included for Immediate Tone Modeling

TONEX Capture includes TONEX SE, so you can start building and using Tone Models right away. It also includes access to ToneNET for uploading favourites and downloading unlimited free tones shared by other users, plus additional Tone Model downloads.

• Includes TONEX SE with 200 Tone Models
• Includes access to ToneNET for uploading tones and downloading unlimited free tones from other users
• Includes 200 downloads of Premium Tone Models
• Includes free access to user-generated Tone Models

Frequently Asked Questions

1. How does TONEX Capture connect between an audio interface and a guitar amp for capturing? It connects to the output of your audio interface and sends that signal to your amplifier at the correct level using the left attenuation control. It then takes a signal from your amp’s line output (with a speaker connected) or from a pedal output and sends it back to your interface using the right attenuation control.
2. Can it capture an amp tone without using microphones or a load box? Yes. It captures your amp tone pre-cabinet without microphones or load boxes, and the From Amp circuit takes a copy of your amp’s direct output and sends it safely to your interface.
3. What does the GND LIFT switch do? Pressing GND LIFT interrupts the ground connection to minimize ground loops, which helps reduce hum and noise.
4. Does it support reamping through pedals as well as amps? Yes. You can connect your interface to a pedal using the TO AMP circuit and then send the pedal back to your interface.
5. What power does it require? It works with a 9V DC power supply.

Add the IK Multimedia TONEX Capture reamping accessory to your cart to streamline tone capture and reamping with your existing interface, amps, cabinets, and pedals. Contact or visit Gibbys Electronic Supermarket for expert advice on matching recording tools, guitar rigs, and studio workflows.