JBL Stage 260F Dual 6.5" 2.5-Way Floorstanding Speakers - Pair

JBL Stage 260F Floorstanding Loudspeakers with Next Generation HDI Waveguide and Dual 6.5-inch Woofers

The JBL Stage 260F speakers deliver a 2.5-way floorstanding design with dual 6.5-inch (165mm) Polycellulose ribbed cone woofers and a 1-inch (25mm) anodized aluminum dome tweeter. They produce deep, accurate, room-filling bass along with a neutral frequency response both on and off axis.

Deep, Accurate Bass and Cohesive Output

The dual 6.5-inch (165mm) Polycellulose ribbed cone woofers use a pure pulp cone with a proprietary material mix to improve rigidity. As a result, the speakers deliver deep, accurate, room-filling bass.

A precision 2.5-way crossover assigns the top woofer right below the tweeter’s output, while the other woofer crosses over at a lower frequency. This creates a dynamic mid-range, and both woofers still extend as deep as they can go for powerful bass that produces cohesive balanced output with a robust low end that can be both heard and felt.

• Dual 6.5-inch (165mm) Polycellulose ribbed cone woofers
• Precision 2.5-way crossover for dynamic mid-range and balanced output

Neutral High-Frequency Detail On and Off Axis

The 1-inch (25mm) anodized aluminum dome tweeter pairs with a Next Generation HDI™ waveguide geometry. JBL developed this complex geometry to improve directivity and reduce diffraction, therefore supporting an overall neutral frequency response both on and off axis.

• Next Generation HDI™ waveguide geometry
• 1-inch (25mm) anodized aluminum dome tweeter

Clean, Uncluttered Wiring and Flexible Connections

Dedicated Atmos 5-way binding posts sit at the bottom and top of the speaker and include integrated wire management that hides wiring for a clean look. If the Atmos terminals are not used, a cover is provided.

Sturdy 5-way binding posts also provide a choice of high-quality connection. They match the binding posts on the JBL MA AVRs, which helps carry a cohesive look throughout.

• Dedicated Atmos 5-way binding posts with integrated wire management
• Cover included for unused Atmos terminals
• Sturdy 5-way binding posts for high-quality connections

Reduced Port Noise from Rear-Firing Tuned Ports

Dual flared racetrack rear-firing tuned ports reduce the velocity of the air when exiting the cabinet. This design eliminates chuffing or coloration of output.

• Dual flared racetrack rear-firing tuned ports
• Flared port geometry reduces chuffing and coloration

Premium Details Throughout the Design

Stage 2 includes magnetically attached grilles, unique trim rings, and a floating front baffle design. These premium details create an upscale look.

• Magnetically attached grilles
• Unique trim rings
• Floating front baffle design

Frequently Asked Questions

• What drivers does the Stage 260F use?

  It uses dual 6.5-inch (165mm) Polycellulose ribbed cone woofers for low frequencies and a 1-inch (25mm) anodized aluminum dome tweeter with a Next Generation HDI™ waveguide for high frequencies.

• What is the speaker’s frequency response and sensitivity?

  The frequency response is 40Hz-25kHz (± 6dB), and the sensitivity is 90dB (at 1M, 2.83V).

• What amplifier power and impedance does it support?

  The recommended amplifier power is 20-225W, and the nominal impedance is 6 Ohms.

• How does it reduce port noise?

  Dual flared racetrack rear-firing tuned ports reduce air velocity when it exits the cabinet, which eliminates chuffing or coloration of output.

• Can it integrate a Dolby Atmos module?

  It is compatible with the 240H Atmos module to add Dolby Atmos to your system, and it includes dedicated Atmos 5-way binding posts with integrated wire management.

Add the JBL Stage 260F loudspeaker to your cart to build a floorstanding speakers system with deep, accurate bass and neutral on- and off-axis response. Contact or visit Gibbys Electronic Supermarket for expert advice on choosing the right speakers, matching amplification, and planning a complete home audio system.