Mitmat Audio 3mm Turntable Platter Mat (MITMAT295)
MITMAT 3 mm Turntable Platter Mat
The MITMAT Platter Mat is a 3 mm thick audio isolation mat that sits between your vinyl record and the platter, creating a stable, vibration-damping interface for cleaner playback. Choose the 300 mm universal size or the 295 mm version designed for select Technics and Linn Sondek models.
Match Your Turntable with Two Precision Diameters
Turntables vary slightly in platter size. MITMAT lets you pick the diameter that fits best:
- 300 mm Standard: A direct drop-in for the vast majority of turntables on the market.
- 295 mm Option: Sized to seat flush on many Technics decks and Linn Sondek platters without overhang.
A proper fit keeps the mat fully supported and allows the stylus to trace grooves at the correct height, maintaining cartridge geometry and tracking accuracy.
3 mm Isolation Layer for Reduced Vibrations
The mat’s 3 mm profile forms a uniform, moderately weighted layer (total mat weight: 3 lbs) that helps block mechanical energy traveling up from the motor and bearing. By limiting these micro-vibrations, the stylus can focus on the musical signal rather than external noise, resulting in greater detail and a quieter background.
Simple, Non-Permanent Upgrade
No tools or adhesive are required—just lift your current slip-mat and place MITMAT on the platter. The material’s surface grips both the platter and the underside of the record, so the mat stays put during cueing yet removes easily if you need to swap sizes or clean.
Frequently Asked Questions
-
Which diameter should I choose?
Most turntables use the 300 mm mat. If you own a Technics or Linn Sondek that specifies a 295 mm platter, select the 295 mm version for an exact fit.
-
Will the 3 mm thickness affect my tonearm height?
Three millimetres is within the range of standard platter mats. In most cases, the existing VTA (Vertical Tracking Angle) remains correct, but you can adjust tonearm height if your turntable offers that setting.
-
Do I need any special cleaning or maintenance?
Occasionally lift the mat and gently brush away any dust on both surfaces. This keeps the interface between platter, mat, and record free of debris for consistent contact.
Upgrade the foundation of your vinyl system today—select the diameter that fits your turntable and add the MITMAT Platter Mat to your cart.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MITMAT 3 mm Turntable Platter Mat
The MITMAT Platter Mat is a 3 mm thick audio isolation mat that sits between your vinyl record and the platter, creating a stable, vibration-damping interface for cleaner playback. Choose the 300 mm universal size or the 295 mm version designed for select Technics and Linn Sondek models.
Match Your Turntable with Two Precision Diameters
Turntables vary slightly in platter size. MITMAT lets you pick the diameter that fits best:
- 300 mm Standard: A direct drop-in for the vast majority of turntables on the market.
- 295 mm Option: Sized to seat flush on many Technics decks and Linn Sondek platters without overhang.
A proper fit keeps the mat fully supported and allows the stylus to trace grooves at the correct height, maintaining cartridge geometry and tracking accuracy.
3 mm Isolation Layer for Reduced Vibrations
The mat’s 3 mm profile forms a uniform, moderately weighted layer (total mat weight: 3 lbs) that helps block mechanical energy traveling up from the motor and bearing. By limiting these micro-vibrations, the stylus can focus on the musical signal rather than external noise, resulting in greater detail and a quieter background.
Simple, Non-Permanent Upgrade
No tools or adhesive are required—just lift your current slip-mat and place MITMAT on the platter. The material’s surface grips both the platter and the underside of the record, so the mat stays put during cueing yet removes easily if you need to swap sizes or clean.
Frequently Asked Questions
-
Which diameter should I choose?
Most turntables use the 300 mm mat. If you own a Technics or Linn Sondek that specifies a 295 mm platter, select the 295 mm version for an exact fit.
-
Will the 3 mm thickness affect my tonearm height?
Three millimetres is within the range of standard platter mats. In most cases, the existing VTA (Vertical Tracking Angle) remains correct, but you can adjust tonearm height if your turntable offers that setting.
-
Do I need any special cleaning or maintenance?
Occasionally lift the mat and gently brush away any dust on both surfaces. This keeps the interface between platter, mat, and record free of debris for consistent contact.
Upgrade the foundation of your vinyl system today—select the diameter that fits your turntable and add the MITMAT Platter Mat to your cart.
